Smart and efficient lighting in Stockholm
This press release is also available in Swedish, see the PDF-file below.
During late evenings and nights the need for fully-lit streets and other outdoor environments are often less. Turning off the lights can however make people feel insecure. Thanks to lighting controls and LED it’s possible to meet people’s needs and save energy at the same time.
- We are taking yet another step forward to make Stockholm modern and climate smart. The new technology has the potential to reduce the city’s energy consumption by 50 percent. In the long term we want to have this type of energy-efficient lighting throughout the whole city, says Daniel Helldén (MP), city council.
In the Stockholm area, there are 50,000 luminaires lighting up the parks and the walking and bicycle paths. With the new technology the energy consumption can be reduced by 4,000,000 kWh, which is equivalent to the CO2-emission of 100 cars driving 20,000 km per year. Therefore the city is now evaluating different kinds of solutions for walking and bicycle paths within the new project “Advanced lighting control for outdoor lighting”.
In Djurgården, daylight and presence controlled LED luminaires with solar cells have been installed. On the other side of the city, in Bromma, LED luminaires with advanced presence control have replaced old conventional luminaires. The project will show the opportunities and differences between the two parts of the project.
- The new lighting on Djurgården is driven completely by solar cells and was a good choice for both the environment and the users. Another advantage is that we don’t have to dig too deep in the ground to make it work, says Gunnar Björkman, park manager at The Royal Djurgården Administration.
The goal for the presence detected lighting in Bromma is to save at least 50 percent compared to the old solution, without compromising on perceived safety and visual comfort. The project is a further development of a project by the Kungsholms Strand in the city centre of Stockholm where presence detected lighting was installed with good results (see the link below).
The project is managed by Sustainable Innovation (Sust) and KTH Light Laboratory in collaboration with the Royal Djurgården Administration, Leading Light, City of Stockholm and Fagerhult and will continue until fall 2015.
For more information, please contact:
Jan Kristoffersson
+46 70 645 37 56
jan.kristoffersson@sust.se
Facts
Bromma between the Tunnlands road and the Gustav III road
Along the walkway between the Tunnlands road and the Gustav III road in Bromma the city of Stockholm has replaced the old post top luminaires with the modern LED luminaire Lunova from Fagerhult, equipped with a radio control system from Tritech. The system is advanced and the radio communication makes it possible to increase the light where the pedestrians are and thereby also increase the sense of security.
Djurgården by de Besches road
Along De Besches road, which previously lacked lighting, the Royal Djurgården Administration installed 42 Active Lights street lights and 32 bollards. The lighting is powered 100 percent by solar energy and is presence detected. The system has an advanced lighting control and radio communication between the posts, which means that the light level increases to create a sense of security for pedestrians.
Related News

Fagerhult’s medical supply units approved under the Medical Device Regulation
Fagerhult’s medical supply units are now approved under the new Medical Device Regulation (MDR). ”We see the benefit of offering our customers products that are already tailored to meet future requirements,” says Lars Handberg, Technical Product Manager for medical supply units. The former Medical Device Directive (MDD) has been replaced by the new Medical Device Regulation (MDR). Suppliers must complete the transition by 31 December 2028 at the latest. Fagerhult is already delivering its medical supply units in full compliance with MDR. ”Fagerhult began early to ensure our documentation and processes were aligned with the new regulation MDR. As a result, Fagerhult’s units already meet the requirements of MDR 2017/745, Article 22,” says Lars Handberg. Img As a consequence of this, the classic CE marking is removed. The reason is that according to the regulation, if you choose to follow Article 22, modular products - the ward panels should not be provided with an additional CE mark, (Article 22, Section 5) beacuse the included components are already CE marked. ”This doesn’t impact the functionality or safety of our products. It is simply a result of the legal framework. Our medical supply units comply with product standards and remain just as safe as before. However, it’s worth noting this in case anyone wonders why the CE marking is no longer present on the new products being delivered”, Lars Handberg explains.
Closing the loop – and extending the lifecycle of luminaires
The concept of rebuilding old luminaires to save material and energy is growing. Sometimes, all an outdated luminaire needs to shine bright again is some tender love and engineering skills. We met Emma Hallman, Mathilda Holl and Andreas Ekslätt, the team behind ReLight at Fagerhult, to discuss the challenges of finding solutions that will take old luminaires into the future. At Fagerhult, a deeply rooted innovation culture influences all aspects of work. Possibly, it springs from the founder Bertil Svensson's mindset of solving problems with sometimes small means – and curiosity and dedication. Unlike today, sustainability may not have been a buzzword back then. However, using our resources consciously and striving for high quality have always been cornerstones for Fagerhult. Today, a new focus on circularity has urged us to challenge our thinking and makes us conscious of finding long-lasting solutions. Fagerhult's Bespoke Lighting Solutions (BLS) department has developed unique luminaires and adapted solutions for many years. So, refurbishing and updating old luminaires is something familiar to us. However, the ambition to reuse and rebuild old luminaires to lower climate impact has increased over time. In this process, yesterday's design and technology are brought up to speed by today's advances to meet the requirements of tomorrow. Quote ReLight your old luminaires To the ReLight team at Fagerhult, there are no unusual questions or impossible solutions. Daily, they manage inquiries regarding specially developed lighting solutions for projects from Fagerhult's markets. It's a complex process, but over time, they have learnt that some projects are ideal for reusing old luminaires instead of investing in new ones. "To us, the luminaire's qualities in lighting comfort, safety and aesthetics are at the core of every ReLight project. When requested, we also calculate if – and how much – we can reduce the luminaire's total climate impact through its lifecycle." says Emma Hallman. Within ReLight, there is an outspoken will to save materials and energy – and make an environmental effort by updating the luminaires. However, not all old luminaires can live forever; some are outdated and better recycled than refurbished. Img "If the circumstances don't meet our requirements and it doesn't work to rebuild the luminaire, we will not take the project further. We would never compromise on light comfort, quality, safety or the expression of the luminaire if it does not result in a first-class end solution", says Emma Hallman. At Fagerhult, safety and quality are the red threads that combine all products. And ReLight is no exception. Throughout the process, CE-marking and testing are crucial factors. "To ensure the overall quality, the updated luminaire is CE-marked in full before delivery. We also want to make the installation on site both smooth and quick, and the new kit is as close to a complete luminaire as possible," says Andreas Ekslätt, Design Engineer.